It has established stable cooperation with many well known universities and institutes in china such as, Zhejiang University, Jilin University, Technical committee of national chain drive standard, Institute of national chain drive, Zhejiang application engineering material institute, Huhan material protection institute; and it cooperated to found China First Car chain institute with National chain drive institute.
Overview
Quick Details
- After Warranty Service:
-
Video technicalIf undistributed loads or continued start-ups are foreseen, it is recommended to insert compensating couplings, connectors, torque limiters etc. support
The company was certified by ISO9001:2008 Quality Management System.
- Local Service Location:
-
Egypt
- Showroom Location:
-
Egypt
- Type:
-
parts
- After-sales Service Provided:
-
Maintenance Maintenance on these units is straight forward and like all moving parts these need their fair share of grease and should be greased regularly as these components work very hard and are subject to all that nature can provide for wear and tear. Good grease is essential here; put grease in until you see the old grease oozing out. Go easy on the “U” joints so you don’t blow the seals. Short bursts of a low pressured air grease gun or even better a hand pump gun will do the job and should be done based on hourly use. At least once a season the primary and secondary shafts should be separated. All debris and any rust should be cleaned off. Examine thoroughly for any signs of stress and apply a liberal amount of grease. In addition to this, both the PTO yoke holes need grease inside of them at least once a year along with the yoke lock pin.
Video technical support
Supply Ability
- Supply Ability:
- 500000 Piece/Pieces per Year
Packaging & Delivery
- Packaging Details
- Carton or Plywood case or PALLET
- Port
- NINGBO/SHANGHAI, CHINA
-
Lead Time
: -
Quantity(Bags) 1 – 50 >50 Est. Time(days) 15 To be negotiated
Online Customization
| TYPE | BMM-8 | BMM-12.5 | BMM-20 | BMM-32 | BMM-40 | BMM-50 | |
| Displcement (ml/r) |
8.2 | 12.9 | 19.9 | 31.6 | 39.8 | 50.3 | |
| Max.Pressure. Drop (Mpa) |
cont. | 10 | 10 | 10 | 10 | 9 | 7 |
| int. | 14 | 14 | 14 | 14 | 14 | 14 | |
| peak. | 20 | 20 | 20 | 16 | 16 | 16 | |
| Max. torque (N.Mm) |
cont. | 11 | 16 | 25 | 40 | 45 | 46 |
| int. | 15 | 23 | 35 | 57 | 70 | 88 | |
| peak. | 21 | 33 | 51 | 64 | 82 | 100 | |
| Max. Speed (cont.)(r/min) |
1950 | 1550 | 1005 | 630 | 500 | 395 | |
| Max. Flow (cont.)(L/min) |
16 | 20 | 20 | 20 | 20 | 20 | |
| Max. Output. Power (cont.)(Kw) |
1.8 | 2.4 | 2.4 | 2.4 | 2.2 | 1.8 | |
| Weight(kg) | 1.9 | 2 | 2.1 | 2.2 | 2.3 | 2.4 |
