All EPT shaft collars, including quick-clamping collars, are sole point faced to make sure perpendicularity and proper alignment. This critical manufacturing stage assures specific shaft collar face to bore relationship resulting in correct element positioning on the shaft and even pressure on interfaced pieces.
Quick-clamping shaft collars from EPT are produced from high quality aluminum with type-II sulfuric anodized finishes, with a dark finish about the collar and a precious metal finish in the clamping lever for added visibility. Light weight aluminum collars are corrosion resilient, Clamping Shaft Collars lighter than additional metals, have low inertia and also have non-magnetic properties. All EPT products happen to be RoHS and REACH compliant. Available standard sizes for the quick-clamping shaft collars happen to be 0.375” to 1 1.5” in the ” series and 8 mm to 38 mm in the metric series.
This EPT two-piece clamping shaft collar is made of black oxide steel. This is a two-part clamping shaft collar for applications needing a stronger holding power and bigger axial load capacity than setscrew or one-part clamping collars. The two-piece design separates into two halves, allowing installation or repositioning anywhere on the shaft without disturbing existing parts. It accommodates a larger selection of shaft diameters than setscrew collars and is effective on both hard and soft shafts. It is made of metal for weldability and rust level of resistance with a black oxide complete for a attractive appearance and resistance to white corrosion, chipping and flaking, and stick-slide of the screw during torqueing, enhancing the collar’s grasp on the shaft. Dark-colored oxide also provides gentle corrosion resistance and much better lubricity. This collar includes forged socket-mind cap screws for securing the collar onto the shaft. The functioning temperatures because of this collar range from -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is suited to use in a variety of applications, including in the motor vehicle industry to situate pieces in automobile ability steering assemblies, the manufacturing industry to locate pieces on a conveyor belt system, and the hobby craft industry to hold tires on axles in handy remote control vehicles, among others.
Allows assembly / disassembly on and off the shaft with no need to eliminate other ancillary components. Clamps firmly in place when tightened to the shaft. Perfect for positioning pieces such as for example bearings or sprockets onto shafts.
The position is easily adjusted when fitted onto a shaft. Clamps firmly in place when tightened to the shaft. Ideal for positioning pieces such as bearings or sprockets onto shafts.
The dual split shaft collar manufactured from steel browned (clamp collar) is easy to install. The shaft collars usually do not destruction the shaft. They are also insensitive to external forces and vibrations and distribute the having forces evenly over the entire shaft circumference.
Clamp-style and established screw shaft collars from Grainger can be indispensable to power transmission. They can maintain bearings and sprockets on shafts, situate pieces in electric motor and gearbox assemblies and serve as mechanical stops. A two-piece clamping shaft collar can certainly wrap around a hard or very soft shaft without marring. Arranged screw collars employ a cup point socket arranged screw to lock onto a very soft or predrilled shaft.

The collar clamping mechanism works quickly and efficiently with simple palm opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer area of the collar. The look of the cam on the lever and the mating machined surface area on the collar assure a tight fit with a optimum axial load of 35 to 120 lbs / 133 to 489 N depending on the collar bore size. In situations where higher holding electric power can be or clamp axial load is required, the quick-clamping collar is not the recommended choice. EPT offers a complete type of industry-leading one-part and two-part shaft collars made for these applications.