Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric electric motor, capacitor and quickness control change is still hooked up however the cord itself is generally detached as observed in the photos. (Find “Control Notice” below for change type.)
T (See “Application Notice” below for utilize in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is definitely½” (0.500″) diameter x 2 ½” long with a collection screw even. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). These two types of switches both control the engine in the same way (but you have a rotating knob and you have a pull-chain). In the event that you order several motor at a time, we can do our best to supply your purchase with each one sort of control or the excess.
Application Note: USUALLY DO NOT use this electric motor in a nonfan application. This is a completely enclosed fan electric engine and designed to have constant ventilation over the electric motor casing for cooling. The housing isn’t vented and 
the electric powered engine will electric fan motor china overheat and enter automated thermal overload if run in a nonfan plan where there isn’t strong ventilation past the engine. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electric motor for applications apart from 18 & 24″ TPI fans could also overload the electric motor and cause it to proceed into automated thermal overload. (Your lover blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric electric motor is manufactured in China.