We – EPG Group the largest gearbox & motors , couplings and gears manufacturing facility in China with 5 various branches. For far more particulars: Mobile/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828
Product attribute:
one. UL, CE, TUV accredited
2. Safe, reputable, minimal noise, good commencing, long lifestyle
3. Robust electricity
four. Stable efficiency
5. Stator dimensions: 60mm*13mm
six.220V/50Hz, 120V/60Hz
Standard utilized:
Exhaust supporter, air purifier, micro-oven, supporter, induction cooker, refrigerator, pump, heater, hood oven, blwer, air conditioner, Heater devices, dehumidifiers
Thermal protector with one particular shot fuse or multi shot fuse
Product | STATOR Dimensions | SHAFT DIA | VOLT | Enter Power | TORQUE (g.cm) | Pace RATED |
YJ6012 | 12mm | 4mm | a hundred and ten-240V | 18W | one hundred twenty | 3000RPM |
YJ6014 | 14mm | 4.5mm | 110-240V | 25W | 150 | 3000RPM |
YJ6016 | 16mm | four.5mm | 110-240V | 30W | 180 | 3000RPM |
YJ6571 | 20mm | 5mm | a hundred and ten-240V | 35W | 260 | 3000RPM |
YJ6571 | 25mm | 6mm | 110-240V | 45W | 350 | 3000RPM |
YJ6030 | 30mm | 6mm | one hundred ten-240V | 53W | 380 | 3000RPM |
Our organization FAQ for you
(1) Q: What type motors you can provide?
A:For now,we mainly give Kitchen area Hood Motor,DC Motor,Equipment Motor,Admirer Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.
(2) Q: Is it feasible to go to your factory
A: Positive. But you should kindly hold us posted a handful of days in advance. We need to check our
plan to see if we are obtainable then.
(3) Q: Can I get some samples
A: It depends. If only a few samples for individual use or substitution, I am afraid it will
be tough for us to offer, simply because all of our motors are personalized made and no inventory
available if there is no additional requirements. If just sample testing prior to the formal purchase and
our MOQ, value and other terms are appropriate, we might adore to offer samples.
(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is in between a thousand~ten,000pcs for various designs right after sample acceptance.
But it truly is also alright for us to take smaller sized tons like a few dozens, hundreds or countless numbers
For the initial 3 orders right after sample acceptance.For samples, there is no MOQ necessity. But the much less the far better (like no far more than 5pcs) on problem that the amount is ample in case any changes needed following initial screening.
ABOUT US
Ritscher team was established up in 2006.we constantly concentrate on micro-motors for household electrical appliance and market appliance because environment up.at the moment we have two professional micro-motor factories in China which severally positioned in HangZhou metropolis and HangZhou metropolis.it has an region of twenty five,000 square meters crops and more than three hundred employees, yearly output is 3 million pcs and has 5 million pcs yearly making capability.after several several years growth,we had built a excellent track record in the market place and obtained much more and a lot more customers’ trust in the entire world.
We started from shaded pole motors at starting, up to now,our item included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our product are commonly used for making fridges, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, therapeutic massage machines and a lot of other equipments. As a realiable good quality warranty,Ritscher has total R&D departement,QC office,creating department,buy division and so on. has perfect generating equipment like Aluminum diecasting, Zinc diecasting, Sheet steel stamping, Plastic injection molding and so forth. also examination/ detection device like multiplex temp measuring gadget, performance parameter inspection device, Phenol peptide resolution pinhole tester,Anechoic space and many others.
Endeavoring to provide the best solution and services to clients,we often do the most hard work to become an fantastic maker of micro motors. Ritscher is constantly ready to create honest business relationship with buddies from all over the entire world. Welcome contact with us!
Get ritscher ,appreciate modern day lifestyle!
The use of first tools manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating product use and compatibility. Our firm and the outlined substitution elements contained herein are not sponsored, accredited, or manufactured by the OEM.