• Electric motor gearboxes are maintenance-free, small power sources for driving vent, display screen, house and flap ventilation systems in greenhouses.
• Single phase and three phase options for your individual needs.
• Key feature of the drives are a self-braking worm equipment transmission and an integral linear limit switch unit.
shaft-installed gear Greenhouse Gear Motor motors are comprehensive electromechanical drives in which the speed of the installed electric motor is reduced to the required value using two to four reduction stages. The drives are powerful and durable and show a concise and lightweight design.
The compact design is manufactured possible through the mixture of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight reduction compared to commercially obtainable drive motors. This is achieved through the consistent application of aluminium die casting technology, which guarantees a high degree of rigidity for the apparatus and motor housing at the same time.
Each drive is produced and tested specifically for each order and customer. A advanced modular system permits an excellent diversity of types and a maximum amount of customization to consumer requirements.
Thanks to their integrated control systems, the shaft-mounted equipment motors are the ideal drives for applications in reversing setting. In both rotation directions, defined end positions are guarded by two position limit switches. This uncomplicated alternative does not only simplify the cabling, but also can help you configure the finish positions quickly and easily. The high shut-off accuracy of the limit switches ensures safe operation moving forwards and backwards.
This gearmotor integrates a gearbox, an electric motor, and limit switches. It is connected with a metal shaft to carefully turn the pinions for greenhouse ventilation. With the support of electrical panel, it could run and then stop after set number of turns. Then it can open and close the windows for greenhouse ventilation to right positions.
To keep up the delicate environment inside a greenhouse, weather control systems certainly are a necessity. Many mechanical systems can be applied in this respect; however glass vent drive systems have a tendency to be the most popular. The drive system contains a central gearmotor linked to a 40:1 correct angle reducer with dual output shafts. These OP shafts connect to lengthy jack shafts that spread over the roof type of the greenhouse connecting to multiple rack and pinion mechanisms that open and close large glass window panes in the ceiling for temperature control.
Depending on 
the size of the application form (length of the shafting, quantity and weight of the windowpane panes) we offers two gearmotor solutions from a modified version of their 200 series parallel shaft collection – 1/5 HP and 1/20 HP. The application Is generally intermittent in use; however the motors are ranked continuous since the glass pane home windows may potentially be under constant, subtle adjustment throughout the day.
Gear Motor, also called Motor Gearboxes, is a specific type of electrical motor that’s designed to produce high torque while maintaining a minimal horsepower, or low quickness, motor output. Gear motors are available in many different applications, specifically for the greenhouse, livestock and agricultural market, our motors can be found options to operate roof vents, wall structure vents,roof shading and screening, they attach to the shaft with chain couplings that compensate for alignment errors and can be easily removed without disturbing the entire shaft.
shaft-mounted gear motors are total electromechanical drives where the speed of the installed electrical motor is decreased to the required value using two to 4 reduction stages. The drives are powerful and durable and feature a compact and lightweight design.