Single and dual reduction planetary gear drives to be utilized with electric, hydraulic, atmosphere motors or mechanical power input from high acceleration, low torque sources to deliver reduced speeds at increased torques. The input aspect has standard SAE pads for engine mounting. Available in the three result configurations proven below. Many units can be furnished with an intrinsic parking brake.
Single reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input rate is bound to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Models provide 95% power transmitting efficiency.
Wheel Drive
Input side has regular SAE pads and splined insight. Output side has hub for installation automobile wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is regular on all wheel drives.
Shaft Output
Input side standard SAE pads with splined insight. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined input. Output side has a flanged spindle for 
coupling to the strain.
Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel has extra-large tapered roller bearings, a ductile iron hub and temperature treated ring gear to reduce backlash growth Plastic Gear Rack caused by wear. The exterior bearing nut provides the greatest in shaft retention and shaft strength. Output can be a spindle shaft or different sizes of essential pinion gears.