Material Dealing with Power UNIT 2
General Description
This electrical power unit features electrical power up gravity down circuit. Activate the begin solenoid to start out the motor to lift the machine. The lowing movement is activated by the solenoid valve using the lowering velocity controlled through the stress compensated flow control valve. Merchandise of this series could be widely utilized in the marketplace of logistic gadgets including fork lift, mini lift table, etc.
Distinctive Notes
1. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean all the hydraulic components concerned before mounting the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which must also be clean and totally free of impurities, N46 hydraulic oil is advisable .
four. Oil transforming is required just after the original a hundred operation hours,afterwards as soon as each and every 3000 hrs.
five. The power unit ought to be mounted horizontally.

Material Managing Power UNIT 1
Standard Description
This power unit is designed for that fork lift market, consisting of hugely productive gear pump, DC motor, guide increase and reduce valve, tank, ect. The up and down movement are controlled by the lever from the manual release valve, which can be outfitted with an electrical switch to activate the motor. The lowing pace is controlled by the pressure compensated movement handle valve.
Specific Notes
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all the hydraulic elements concerned ahead of installation of the power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which should also be clean and absolutely free of impurities, N46 hydraulic oil is suggested .
four. Oil altering is required just after the preliminary a hundred operation hrs, afterwards the moment just about every 3000 hours.
five. The power unit shown is built to be mounted horizontally.