Equiped having a reversible motor, a bidirectional gear pump, double P.O. checke valves, relief valves plus a tank, this power unit can drive a double acting cylinder to extend and retract with no directional solenoid valve. It can be typically used in recre-ational vehicles, pleasure boats and moveable stages, and so forth.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned before installation of the power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of charge of impurities. N46 hydraulic oil is proposed.
four. The energy unit proven is made to be mounted horizontally.
5. Oil transforming is needed just after the preliminary 100 operation hrs, afterwards the moment each and every 3000 hrs.
six. Check the oil level during the tank right after the first working on the electrical power unit.