The smallest chain complying to ANSI is 25 of six.35 mm pitch. However, in response on the demands for smaller sized chains in recent times for higher technological innovation machinery such as office products, healthcare machines and industrial robots, we deliver 15 of 4.7625 mm (3/16 inch) pitch and in addition 15H1 being a high-power model of 15. These large precision chains are produced underneath significant high quality management particularly needed for little sizes, taking put on resistance also under consideration.
Variety of chain
Refer towards the “Low-speed selection”. Nevertheless, the chain operation pace is usually set significantly high according to the type of lubrication as shown inside the table beneath.
Connecting hyperlinks and offset links
R connecting back links are made use of for compact pitch chains. However, due to the fact their power is decrease than that in the base chain, and because the clip is prone to come off in substantial velocity operation, the use of connecting back links isn’t proposed. Use a loop chain without having attaching connecting links.
Offset links can be found for chains apart from 15 and 15H1, but their use is not proposed for the exact same reason as stated for the R Connecting back links.
Working speed and sort of lubrication
15: A large precision mini-pitch bushing chain that may be smaller sized than a compact drive chain for standard applications, 25
25: Smallest bushing chain amid ANSI typical chains utilizing curl bushings.
35: A ANSI standard bushing chain ideal for compact precision machines that require high power.