1.A connecting link of an O-ring Chain for standard application is pre-coated with grease at the pins. Ahead of connection, verify the grease around the surfaces of pins, and in the event the level of grease is small, apply grease with bare hands. (If gloves are utilised, the grease will be absorbed from the gloves.)
Illustration: When the connecting website link (I) of an O-ring chain for general application is
shipped, O-rings are fitted at the roots in the pins. If the O-rings come loose as a result of vibration throughout transport, refit the O-rings in towards the roots on the pins.
In this case, be sure you return the grease collected with the roots from the pins for the central surfaces in the pins, far more at portion A than at portions B shown during the over illustration. (Portions A is worn as a result of sliding with the bushings.)
2.The chain is often most conveniently linked around the teeth of a sprocket. Engage the links at both ends from the chain together with the sprocket teeth and fit connecting pins. When the sprocket might be moved, the chain can also be connected within the loosened side.
3. Connecting procedure
1.Verify that O-rings are attached on the roots on the pins.
2.If the quantity of grease applied on the connecting pins is tiny, coat the pins with grease on the central portions.
3.Insert the connecting pins into the bushings of your inner back links at each ends.
four.Verify that the grease is utilized for the total face in the O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins into the connecting plate and although pressing the connecting plate, install the spring clip. Verify regardless of whether the head (the finish with no split) with the spring clip is turned during the feeding path from the chain. (See the next illustration.)
six.You should definitely confirm that the spring clip is securely fitted while in the clip grooves of your connecting pins.
This completes jointing on the connecting hyperlink. Note that grease on the surfaces of connecting pins and O-rings can be eliminated for the duration of installation perform. In this case, re-grease employing the grease around the surface of the base chain or the grease during the polyethylene bag by which the connecting link was contained.